Flat return idlers are the most common idler on the return side of a conveyor with single steel mounted on two drop brackets although a one roller design for flat return idlers is the most common,they are also available with two rollers.
The purpose of using a flat return idler is to support the belt from the return side to prevent stretching.
Troughing idlers are designed such that the loaded belt itself froms a trough,which both reduces the risk of mater... Continue
Impact idlers are designed for loading areas of the belt, where belt damage is common due to the falling material and co... Continue
Self-Aligning idlers ensure that your conveyor belts stay on track,minimising the chance of severe belt damage.Concave... Continue
Used on the return transom to support the belt when the material being conveyed,even if only a little sticky,is very vis... Continue
The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger... Continue
The ASHWAMEGH HDPE roller features a black high density polyethylene tube, with p.p moulded housing, while for rollers l... Continue
Roller conveyor are normally used in environments such as werehouses or manufacturing facility due to the nature of tran... Continue
Belt Width (mm)ACarrying Roller LengthBHole Crs.C Return Roller LengthDRol... Continue
Classification of Conveyor Pulley according to its Location & FuncationDrive PulleyPulley connected to the run c... Continue